RACM-80
This metallographic specimen cutting machine is equipped with big cutting chamber and movable T-shape work table. Therefore, this machine has the ability of cutting rectangle and large specimens. It is an ideal metallographic specimen preparation equipment to be used in factories, colleges and research institutes.
The machine can preset the cutting speed according to different specimens, this will improve the cutting performance and quality of specimen.
Re-circulating cooling system help to cool down the specimen during cutting process, to avoid burning damage to the organization.
The machine can be operated in manual cutting mode or automatic cutting mode.
Various cutting data can be displayed on high-definition backlight type LCD screen.
Delay cutting (for large and hard specimen) and continuous cutting (for small and soft specimen) can be selected.
Automatic withdraw function after cutting is finished.
Equipped with 60 L cooling liquid water tank.
| Display | LCD with high resolution back lit dot matrix |
|---|---|
| Max. cutting diameter | Ø80mm |
| Main shaft rotating speed | 2100rpm |
| Cutting wheel dimensions | 350 x 2.5 x 32mm |
| Max. moving travel | 125mm |
| Motor power | 2.2KW |
| Power supply | 380V, 50Hz, three phases |